Difference between revisions of "Bill of materials"
(Created blank page) |
|||
| Line 1: | Line 1: | ||
| + | This '''Bill of materials''' is designed to take into account your particular project goals. "Materials" herein is referred to in a broad sense, including not only the material parts which make up the device, but also the "materials" of the project as a whole activity, including safety gear, hand tools, power tools, furniture, measuring devices, and recording devices. | ||
| + | ==Parts== | ||
| + | |||
| + | All S.H.O. Drives will share certain things in common. | ||
| + | |||
| + | # Every S.H.O. Drive will contain one or more conductive windings which looks like an S, an H, or a O, depending on how viewed, each referred to as S.H.O. coil. | ||
| + | # Every S.H.O. Drive will contain a permanent magnet located inside the S.H.O. Coil(s); which will rotate mechanically. | ||
| + | # Every S.H.O. Drive will contain a support structure to carry the winding and permanent magnet. | ||
| + | |||
| + | S.H.O. Drives will differ in their implementation. For each S.H.O. Drive, the parts must have some level of compatibility with each other. Design specifics may vary widely, and the overall size of each S.H.O. Drive is probably the most important of them all. | ||
| + | |||
| + | ==Safety gear== | ||
| + | |||
| + | Safety gear is an absolute must in any S.H.O. project. See to it that you have this covered. | ||
| + | |||
| + | ==Hand tools== | ||
| + | |||
| + | Hand tools are essential for any S.H.O. Drive maker. | ||
| + | |||
| + | ==Power tools== | ||
| + | |||
| + | It is very convenient to use power tools, although more care is needed in their operation. | ||
| + | |||
| + | ==Furniture== | ||
| + | |||
| + | Depending on your resources, you may have a dedicated working space already in place, such as many have in their own private tool shed or garage. Others are not necessarily as fortunate. | ||
| + | |||
| + | ==Measuring devices== | ||
| + | |||
| + | Although not strictly required to physically make a S.H.O. drive, it is very helpful to have in hand devices such as digital multimeters and thermometers, Recording data from your results is highly recommended, as it is the essential "fruit" of each project which will raise legitimacy of one' efforts. | ||
| + | |||
| + | ==Recording== | ||
| + | |||
| + | You may or may not be one of those people wanting to share their S.H.O. Drive replication to the world. For those that do, it is helpful to have a camera or video recording device. | ||
Revision as of 20:32, 23 April 2016
This Bill of materials is designed to take into account your particular project goals. "Materials" herein is referred to in a broad sense, including not only the material parts which make up the device, but also the "materials" of the project as a whole activity, including safety gear, hand tools, power tools, furniture, measuring devices, and recording devices.
Contents
Parts
All S.H.O. Drives will share certain things in common.
- Every S.H.O. Drive will contain one or more conductive windings which looks like an S, an H, or a O, depending on how viewed, each referred to as S.H.O. coil.
- Every S.H.O. Drive will contain a permanent magnet located inside the S.H.O. Coil(s); which will rotate mechanically.
- Every S.H.O. Drive will contain a support structure to carry the winding and permanent magnet.
S.H.O. Drives will differ in their implementation. For each S.H.O. Drive, the parts must have some level of compatibility with each other. Design specifics may vary widely, and the overall size of each S.H.O. Drive is probably the most important of them all.
Safety gear
Safety gear is an absolute must in any S.H.O. project. See to it that you have this covered.
Hand tools
Hand tools are essential for any S.H.O. Drive maker.
Power tools
It is very convenient to use power tools, although more care is needed in their operation.
Furniture
Depending on your resources, you may have a dedicated working space already in place, such as many have in their own private tool shed or garage. Others are not necessarily as fortunate.
Measuring devices
Although not strictly required to physically make a S.H.O. drive, it is very helpful to have in hand devices such as digital multimeters and thermometers, Recording data from your results is highly recommended, as it is the essential "fruit" of each project which will raise legitimacy of one' efforts.
Recording
You may or may not be one of those people wanting to share their S.H.O. Drive replication to the world. For those that do, it is helpful to have a camera or video recording device.
