Difference between revisions of "YouTube/2016-08"

Description 1: New S.H.O. Coil Design + Explanation of Magnetic Energy

Description 2: Explanation of Magnetic Energy (Continued) + Future Outlook on Project

Filename 1: 00005.MTS

Filename 2: 00006.MTS

Original Clip 1: https://youtu.be/E1_mma3xWfU

Original Clip 2: https://youtu.be/3MiSP_K-enc

Music: Part Time Rocket Pilot by TeknoAXE http://teknoaxe.com/Link_Code_2.php?q=618 (Creative Commons)

URL: https://www.youtube.com/watch?v=fMLngZsRFnk

Description: New S.H.O. Coil Design + File code for *.viz files for Visualis Electromagnetism

Filename: New S.H.O. Coil Design.mp4

Original Clip: https://youtu.be/MTc707bAuR8

Music: Part Time Rocket Pilot by TeknoAXE http://teknoaxe.com/Link_Code_2.php?q=618 (Creative Commons)

URL: https://www.youtube.com/watch?v=4P901-BUhaM

0:10:00 Description 1: Preparing for Cutting Acrylic Rods + Cutting out 8 pieces of 15 1/2” by 1/4” Square Acrylic Rods

0:20:13 Description 2: Cutting out 8 pieces of 15 1/2” by 1/4” Square Acrylic Rods (Continued)

0:40:16 Description 3: Cutting out 8 pieces of 15 1/2” by 1/4” Square Acrylic Rods (Continued)

1:00:18 Description 4: Cutting out 8 pieces of 15 1/2” by 1/4” Square Acrylic Rods (Continued) + Cutting out the first 2 of 4 pieces of 4 3/4” by 1/4” Square Acrylic Rods

1:20:20 Description 5: Cutting out the first 2 of 4 pieces of 4 3/4” by 1/4” Square Acrylic Rods (Continued) + Cutting out the first 2 of 4 pieces of 3 5/8” by 1/4” Square Acrylic Rods

1:40:23 Description 6: Cutting out the first 2 of 4 pieces of 3 5/8” by 1/4” Square Acrylic Rods (Continued) + Cutting out the first 3 of 8 pieces of 15 1/2” by 5/8” Square Acrylic Rods

2:00:26 Description 7: Cutting out the first 3 of 8 pieces of 15 1/2” by 5/8” Square Acrylic Rods (Continued) + Preparing 2 of the 5/8” Rods for Attachment

2:20:29 Description 8: Preparing 2 of the 5/8” Rods for Attachment (Continued) + Cutting out the last 2 of 4 pieces of 4 3/4” by 1/4” Square Acrylic Rods and last 2 of 4 of 3 5/8” by 1/4” Square Acrylic Rods + Attaching Bottom 5/8” Vertical Carry Rods with 1/4” Lateral Restraint Rods

2:40:33 Description 9: Attaching Bottom 5/8” Vertical Carry Rods with 1/4” Lateral Restraint Rods (Continued)

3:00:35 Description 10: Cutting out the last 5 of 8 pieces of 15 1/2” by 5/8” Square Acrylic Rods

3:20:37 Description 11: Finishing the Cut on the Last Acrylic Rod + Clean Up

3:40:39 Description 12: Installing the Acrylic Rods and Acrylic Panel on to the S.H.O. Drive Enclosure Crate

4:00:46 Description 13: Taking Pictures of the S.H.O. Drive's Enclosure with Acrylic Rods

Filename 1: 00007.MTS

Filename 2: 00008.MTS

Filename 3: 00009.MTS

Filename 4: 00010.MTS

Filename 5: 00011.MTS

Filename 6: 00012.MTS

Filename 7: 00013.MTS

Filename 8: 00014.MTS

Filename 9: 00015.MTS

Filename 10: 00016.MTS

Filename 11: 00017.MTS

Filename 12: 00018.MTS

Filename 13: 00019.MTS

Original Clip 1: https://youtu.be/cqTG97D1ID8

Original Clip 2: https://youtu.be/GAAShGDHlOE

Original Clip 3: https://youtu.be/DPRgZ9cS2Yc

Original Clip 4: https://youtu.be/rL5gLjWSiR0

Original Clip 5: https://youtu.be/FVughsHqblM

Original Clip 6: https://youtu.be/Jzev9DMXTr0

Original Clip 7: https://youtu.be/qUlSoXfUanM

Original Clip 8: https://youtu.be/Ps6ldEEHbis

Original Clip 9: https://youtu.be/VY00Gj9Jl_o

Original Clip 10: https://youtu.be/jvDBfkOilJk

Original Clip 11: https://youtu.be/1VDK98eeuZw

Original Clip 12: https://youtu.be/u-jA0Fpeu1g

Original Clip 13: https://youtu.be/UGE3JgpibNU

Music: Part Time Rocket Pilot by TeknoAXE http://teknoaxe.com/Link_Code_2.php?q=618 (Creative Commons)

URL: https://www.youtube.com/watch?v=dRhpBRPi_yM

00:10 Description 1: Redesigning the S.H.O. Coil + Magnetic Induction in the S.H.O. Drive

15:16 Description 2: Magnetic Induction in the S.H.O. Drive (Continued)

30:21 Description 3: Surface Fields vs. Side Fields of a Magnet

45:27 Description 4: Surface Fields vs. Side Fields of a Magnet (Continued) + Pictures and Videos of Recent Build of the S.H.O. Drive Enclosure

Filename 1: Anatomy of the S.H.O. Drive - Part 1 of 4.mp4

Filename 2: Anatomy of the S.H.O. Drive - Part 2 of 4.mp4

Filename 3: Anatomy of the S.H.O. Drive - Part 3 of 4.mp4

Filename 4: Anatomy of the S.H.O. Drive - Part 4 of 4.mp4

Original Clip 1: https://youtu.be/T-mZox3mb6I

Original Clip 2: https://youtu.be/Z7AtkF5W9BQ

Original Clip 3: https://youtu.be/yXgrUfXFJik

Original Clip 4: https://youtu.be/anyrg4HenQE

Music: Part Time Rocket Pilot by TeknoAXE http://teknoaxe.com/Link_Code_2.php?q=618 (Creative Commons)

URL: https://www.youtube.com/watch?v=huy53KdwAE4

0:00:10 Description 1: Presenting the Setup + Making the Rotor Shaft

0:20:12 Description 2: Making the Rotor Shaft (Continued) + Adjusting the S.H.O. Coil Design

0:40:14 Description 3: Adjusting the S.H.O. Coil Design (Continued) + Making the Winding Spool

1:00:17 Description 4: Making the Winding Spool (Continued) + Preparing for the Unwinding

1:20:18 Description 5: Sanding the Ends of the Copper Wire

1:40:19 Description 6: Measuring the Resistance + Measuring the Inductance

2:00:17 Description 7: Measuring the Inductance (Continued) + Final Thoughts

Filename 1: 00021.MTS

Filename 2: 00022.MTS

Filename 3: 00023.MTS

Filename 4: 00024.MTS

Filename 5: 00025.MTS

Filename 6: 00026.MTS

Filename 7: 00027.MTS

Original Clip 1: https://youtu.be/OzEBQgDx8IQ

Original Clip 2: https://youtu.be/GgfJmzdsUI8

Original Clip 3: https://youtu.be/aeQHvCb5HE4

Original Clip 4: https://youtu.be/ml6qZHNVkuA

Original Clip 5: https://youtu.be/QpIleInurG0

Original Clip 6: https://youtu.be/JhMP4RXk8Iw

Original Clip 7: https://youtu.be/1n4OTdSrpWY

Music: Part Time Rocket Pilot by TeknoAXE http://teknoaxe.com/Link_Code_2.php?q=618 (Creative Commons)

URL: https://www.youtube.com/watch?v=22f5dmIRY08

0:00:10 Description 1: Presenting the Setup + Measuring Inductance

0:20:13 Description 2: Measuring the Resistance of the 1st Unwound Supply of Copper + Measuring the Inductance of the 1st Unwound Supply of Copper + Prepping the Winding of the Coil

0:40:16 Description 3: Winding the 1st Coil

1:00:19 Description 4: Winding the 1st Coil (Continued)

1:20:22 Description 5: Winding the 1st Coil (Continued)

1:40:25 Description 6: Winding the 1st Coil (Continued)

2:00:28 Description 7: Winding the 1st Coil (Continued)

2:20:31 Description 8: Winding the 1st Coil (Continued) + Clamping the 1st Coil + Measuring Inductance of the 1st Coil

2:40:34 Description 9: Reviewing the Plan + Having Lunch + Testing the Thermometer

3:00:37 Description 10: Taking a Break + Taking a Few Pictures + Mending the 1st Coil + Testing the Inductance of the 1st Coil

3:20:38 Description 11: Testing the Inductance of the 1st Coil (Continued) + Testing the Resistance of the 1st Coil + Preparing the Spool for the Next Winding

3:40:42 Description 12: Preparing the Spool for the Next Winding (Continued) + Testing the Inductance of the 2nd Unwound Supply of Copper + Testing the Resistance of the 2nd Unwound Supply of Copper

4:00:46 Description 13: Testing the Resistance of the 2nd Unwound Supply of Copper (Continued) + Winding the 2nd Coil

4:20:49 Description 14: Winding the 2nd Coil (Continued)

4:40:53 Description 15: Winding the 2nd Coil (Continued)

5:00:56 Description 16: Winding the 2nd Coil (Continued) + Clamping the 2nd Coil

5:21:00 Description 17: Clamping the 2nd Coil (Continued) + Mending the 2nd Coil + Measuring the Inductance Values of the 1st and 2nd Coils + Repositioning and Distributing the Clamps

Filename 1: 00029.MTS

Filename 2: 00030.MTS

Filename 3: 00031.MTS

Filename 4: 00032.MTS

Filename 5: 00033.MTS

Filename 6: 00034.MTS

Filename 7: 00035.MTS

Filename 8: 00036.MTS

Filename 9: 00037.MTS

Filename 10: 00038.MTS

Filename 11: 00039.MTS

Filename 12: 00040.MTS

Filename 13: 00041.MTS

Filename 14: 00042.MTS

Filename 15: 00043.MTS

Filename 16: 00044.MTS

Filename 17: 00045.MTS

Original Clip 1: https://youtu.be/_3e32k3zoS0

Original Clip 2: https://youtu.be/aB4MFuP-GrE

Original Clip 3: https://youtu.be/F88L7lOgISs

Original Clip 4: https://youtu.be/bkADc9ibgPs

Original Clip 5: https://youtu.be/O9ughqtZ0nI

Original Clip 6: https://youtu.be/md6T49d3HVg

Original Clip 7: https://youtu.be/PAa00xGDUxw

Original Clip 8: https://youtu.be/C_8lPaBtA1o

Original Clip 9: https://youtu.be/MhkNJXhSSmM

Original Clip 10: https://youtu.be/bbirnGmkSq8

Original Clip 11: https://youtu.be/kZBKb_st1cw

Original Clip 12: https://youtu.be/Fa_liVMxEX4

Original Clip 13: https://youtu.be/8N_PLhXvhqo

Original Clip 14: https://youtu.be/io-unmWiJWQ

Original Clip 15: https://youtu.be/f_N24PaQtwg

Original Clip 16: https://youtu.be/TuPuR0KFIA0

Original Clip 17: https://youtu.be/VlSe15s1OAs

Music: Part Time Rocket Pilot by TeknoAXE http://teknoaxe.com/Link_Code_2.php?q=618 (Creative Commons)

URL: https://www.youtube.com/watch?v=3p-Petzq56g

Description: Testing Coils and Assembling Magnets

0:00:10 Description 18: Repositioning and Distributing the Clamps (Continued) + Counting the Number of Turns of Both Coils + Measuring the Resistances of Both Coils + Preparing the Ends of the 1st Coil for Ring Terminal Attachment

0:20:11 Description 19: Preparing the Ends of the 1st Coil for Ring Terminal Attachment (Continued) + Crimping Ring Terminals on the Ends of the Coil Wires

0:40:11 Description 20: Crimping Ring Terminals on the Ends of the 1st Coil (Continued) + Preparing the Ends of the 2nd Coil for Ring Terminal Attachment + Crimping Ring Terminals on the Ends of the 2nd Coil

1:00:11 Description 21: Crimping Ring Terminals on the Ends of the 2nd Coil (Continued) + Connecting the 1st and 2nd Coils Together + Measuring the Combined Inductance of the Coils

1:20:12 Description 22: Measuring the Combined Inductance of the Coils (Continued) + Reviewing the Plan + Arranging the Space for the Magnet Assembly

1:40:11 Description 23: Defining the Assembly Sequence for the Magnet Stack + Clamping the Rotor Shaft for Magnet Assembly + Revealing the Neodymium Magnets

2:00:07 Description 24: Revealing the Neodymium Magnets (Continued) + Setting up the Metal Brackets + Readjusting the Work Surface + Inserting Batteries into Magnetic Pole Detector

2:20:08 Description 25: Testing Magnetic Pole Detector + Attempting to Build a Horizontal Array of Magnets

2:40:08 Description 26: Attempting to Build a Horizontal Array of Magnets (Continued)

3:00:10 Description 27: Attempting to Build a Horizontal Array of Magnets (Continued) + Resorting to the Older Plan of a Vertical Array of Magnets

3:20:10 Description 28: Resorting to the Older Plan of a Vertical Array of Magnets (Continued)

3:40:11 Description 29: Resorting to the Older Plan of a Vertical Array of Magnets (Continued) + Framing the Magnet inside the Crate + Taking Pictures

4:00:12 Description 30: Reviewing the Plan

Filename 18: 00046.MTS

Filename 19: 00047.MTS

Filename 20: 00048.MTS

Filename 21: 00049.MTS

Filename 22: 00050.MTS

Filename 23: 00051.MTS

Filename 24: 00052.MTS

Filename 25: 00053.MTS

Filename 26: 00054.MTS

Filename 27: 00055.MTS

Filename 28: 00056.MTS

Filename 29: 00057.MTS

Filename 30: 00058.MTS

Original Clip 18: https://youtu.be/YhTByccsUPU

Original Clip 19: https://youtu.be/curAr7AAvqo

Original Clip 20: https://youtu.be/1Qx6UU9W9pk

Original Clip 21: https://youtu.be/t83XRvrHn78

Original Clip 22: https://youtu.be/WANh5Ps6bCI

Original Clip 23: https://youtu.be/3s1cmlok6sc

Original Clip 24: https://youtu.be/51YqNdWyd7Y

Original Clip 25: https://youtu.be/UciKVrn-MGM

Original Clip 26: https://youtu.be/oar90W3Xn50

Original Clip 27: https://youtu.be/PD5efa0U3MI

Original Clip 28: https://youtu.be/_1EUy5zkIKA

Original Clip 29: https://youtu.be/CZsC_ciDeq0

Original Clip 30: https://youtu.be/C_0xoPJnfCs

Music: Part Time Rocket Pilot by TeknoAXE http://teknoaxe.com/Link_Code_2.php?q=618 (Creative Commons)

URL: https://www.youtube.com/watch?v=iqvDbvW-wN8

Description: Making and Hanging the S.H.O. Coils

0:00:10 Description 1: Presenting the Setup + Measuring Resistance + Adjusting the S.H.O. Coil Design + Marking the Position for the S.H.O. Coil Bends

0:20:13 Description 2: Marking the Position for the S.H.O. Coil Bends (Continued) + Attempting to Bend a Coil Into a S.H.O. Coil With a Tubing Bender (Continued)

0:40:14 Description 3: Attempting to Bend a Coil Into a S.H.O. Coil With a Tubing Bender (Continued) + Bending a Coil Into a S.H.O. Coil by Hand + Bending another Coil Into a S.H.O. Coil by Hand

1:00:13 Description 4: Bending another Coil Into a S.H.O. Coil by Hand (Continued) + Setting up the Bonding Tape for the Hooks

1:20:13 Description 5: Setting up the Bonding Tape for the Hooks (Continued) + Wrapping Electrical Tape around a S.H.O. Coil Wire Bundle

1:40:14 Description 6: Wrapping Electrical Tape around a S.H.O. Coil Wire Bundle (Continued) + Attaching Hooks to a S.H.O. Coil (Continued)

2:00:15 Description 7: Wrapping Electrical Tape around a S.H.O. Coil Wire Bundle (Continued) + Attaching Hooks to a S.H.O. Coil (Continued)

2:20:14 Description 8: Attaching Hooks to a S.H.O. Coil (Continued) + Testing the Inductance of Both S.H.O. Coils + Wrapping Electrical Tape around another S.H.O. Coil Wire Bundle + Attaching Hooks to another S.H.O. Coil

2:40:09 Description 9: Wrapping Electrical Tape around another S.H.O. Coil Wire Bundle (Continued) + Attaching Hooks to another S.H.O. Coil (Continued)

3:00:11 Description 10: Attaching Hooks to another S.H.O. Coil (Continued) + Attaching Both S.H.O. Coils to an Acrylic Panel + Taking Pictures

3:20:11 Description 11: Taking Pictures (Continued) + Attaching Hooks to the Other Side of the S.H.O. Coils + Improving the Electrical Tape Wrap around the S.H.O. Coil Windings + Attaching the 2nd Acrylic Panel to the S.H.O. Coils

3:40:08 Description 12: Attaching the 2nd Acrylic Panel to the S.H.O. Coils (Continued) + Removal of S.H.O. Coils from Acrylic Panels + Cleaning the Acrylic Panels + Improving the Electrical Tape Wrap around the S.H.O. Coil Windings + Adjusting Hook Positions

4:00:06 Description 13: Improving the Electrical Tape Wrap around the S.H.O. Coil Windings (Continued) + Adjusting Hook Positions (Continued)

4:20:04 Description 14: Improving the Electrical Tape Wrap around the S.H.O. Coil Windings (Continued) + Adjusting Hook Positions (Continued)

4:40:01 Description 15: Improving the Electrical Tape Wrap around the S.H.O. Coil Windings (Continued) + Adjusting Hook Positions (Continued)

4:59:59 Description 16: Improving the Electrical Tape Wrap around the S.H.O. Coil Windings (Continued) + Adjusting Hook Positions (Continued) + Connecting the S.H.O. Coils

5:19:56 Description 17: Improving the Electrical Tape Wrap around the S.H.O. Coil Windings (Continued) + Adjusting Hook Positions (Continued) + Replacing a Ring Terminal + Measuring the Inductance of Each S.H.O. Coil + Taking Pictures + Clean Up

5:39:54 Description 18: Clean Up (Continued) + Inserting the Magnet Stack Between the Panels + Securing the Ends of the Shaft

Filename 1: 00061.MTS

Filename 2: 00062.MTS

Filename 3: 00063.MTS

Filename 4: 00064.MTS

Filename 5: 00065.MTS

Filename 6: 00066.MTS

Filename 7: 00067.MTS

Filename 8: 00068.MTS

Filename 9: 00069.MTS

Filename 10: 00070.MTS

Filename 11: 00071.MTS

Filename 12: 00072.MTS

Filename 13: 00073.MTS

Filename 14: 00074.MTS

Filename 15: 00075.MTS

Filename 16: 00076.MTS

Filename 17: 00077.MTS

Filename 18: 00078.MTS

Original Clip 1: https://youtu.be/g1zIPvYvTLU

Original Clip 2: https://youtu.be/ylj84BD518U

Original Clip 3: https://youtu.be/3Ys8iFkCLOI

Original Clip 4: https://youtu.be/Sp2so2lbu1s

Original Clip 5: https://youtu.be/filCAddNXxc

Original Clip 6: https://youtu.be/FEA6xI5UhXw

Original Clip 7: https://youtu.be/tw019VwNZJ4

Original Clip 8: https://youtu.be/IaT-qCyVEjU

Original Clip 9: https://youtu.be/M3Yc-P5esg8

Original Clip 10: https://youtu.be/2NCx23CiDUY

Original Clip 11: https://youtu.be/H79yyrdJ65M

Original Clip 12: https://youtu.be/sR6Bi29Er4k

Original Clip 13: https://youtu.be/Xzn91ZxDbSE

Original Clip 14: https://youtu.be/D4qZ1pXM_oI

Original Clip 15: https://youtu.be/i_gqF4IUmzk

Original Clip 16: https://youtu.be/7FobWUOmARs

Original Clip 17: https://youtu.be/zrwU6LOwV5Q

Original Clip 18: https://youtu.be/zEUWNzSPvM0

Music: Part Time Rocket Pilot by TeknoAXE http://teknoaxe.com/Link_Code_2.php?q=618 (Creative Commons)

URL: https://www.youtube.com/watch?v=8Mb8VPmVjVw

Description: Inducing Voltage into S.H.O. Coils

0:00:10 Description 19: Securing the Ends of the Shaft (Continued) + Testing Induced Voltage with RMS Multimeters + Testing Induced Voltage with Pocket Oscilliscope

0:20:05 Description 20: Testing Induced Voltage with Pocket Oscilliscope (Continued) + Adding Ring Terminals to Insulated Wire + Connecting the Ends of the S.H.O. Coil + Testing the Combined Inductance of the S.H.O. Coils

0:39:57 Description 21: Testing the Combined Inductance of the S.H.O. Coils (Continued) + Testing Induced Voltage Across Two Coils in Series with Pocket Oscilloscope + Measuring the Total Coil Resistance + Reviewing Plan + Further Testing of Induced Voltage Across Two Coils in Series with Pocket Oscilloscope

0:59:53 Description 22: Further Testing of Induced Voltage Across Two Coils in Series with Pocket Oscilloscope + Reviewing Plan + Taking Pictures

1:19:52 Description 23: Taking Pictures (Continued) + Showing the Crenova Trail Camera + Reviewing Plan + Future Outlook

Filename 19: 00079.MTS

Filename 20: 00080.MTS

Filename 21: 00081.MTS

Filename 22: 00082.MTS

Filename 23: 00083.MTS

Original Clip 19: https://youtu.be/ltv8wHMXeSc

Original Clip 20: https://youtu.be/haw9fSB93-0

Original Clip 21: https://youtu.be/ibaN0TOQnUA

Original Clip 22: https://youtu.be/odKWWzjwXZQ

Original Clip 23: https://youtu.be/VEv67M_gQhU

Music: Part Time Rocket Pilot by TeknoAXE http://teknoaxe.com/Link_Code_2.php?q=618 (Creative Commons)

URL: https://www.youtube.com/watch?v=swDJuv3szMM